# File generated by XConfigurator. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" FontPath "/usr/X11R6/lib/X11/fonts/TrueType" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. #DontZoom # useful for usb mouse AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line #Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be # required when using pre-R6 clients #ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) #Xleds 1 2 3 #To set the LeftAlt to Meta, RightAlt key to ModeShift, #RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta ScrollLock Compose RightCtl Control # To disable the XKEYBOARD extension, uncomment XkbDisable. XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbKeycodes "xfree86" XkbTypes "default" XkbCompat "default" XkbSymbols "us(pc101)" XkbGeometry "pc" XkbRules "xfree86" XkbModel "pc101" XkbLayout "us" EndSection # ********************************************************************** # XInput section # ********************************************************************** Section "XInput" Subsection "Mouse" Protocol "IMPS/2" Port "/dev/input/mice" Device "/dev/input/mice" DeviceName "Mixed USB Mouse" ZAxisMapping 4 5 AlwaysCore EndSubsection EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) Emulate3Buttons Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic LCD Panel 1024x768" VendorName "Unknown" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-48.5 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 40-70 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace # 640x400 @ 85 Hz, 37.86 kHz hsync Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync # 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync # 1152x864 @ 89 Hz interlaced, 44 kHz hsync ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace # 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 640x480 @ 100 Hz, 53.01 kHz hsync Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync # 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync # 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace # 800x600 @ 100 Hz, 64.02 kHz hsync Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync # 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 # 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 # 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 # 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync # 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 # 1280x1024 @ 70 Hz, 74.59 kHz hsync Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync # 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 # 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 # 1024x768 @ 100Hz, 80.21 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync # 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 # 1600x1200 @ 70 Hz, 87.50 kHz hsync Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync # 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync # 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync # 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync # 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync # 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync # 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync # 1024x480 for VAIO C1 # Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 # 800x600 for Chandra II(ThinkPad 235) # Modeline "800x600" 56 800 824 896 1024 600 601 603 625 # Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by Xconfigurator: Section "Device" Identifier "My Video Card" VendorName "Unknown" BoardName "Unknown" #VideoRam 4096 # Use Option "no_bitblt" if you have graphics problems. If that fails # try Option "noaccel". # Refer to /usr/X11R6/lib/doc/README.cirrus. # To allow linear addressing, uncomment the Option line and the # address that the card maps the framebuffer to. # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA" for Standard VGA 320x200x256 #Device "Generic VGA" Device "My Video Card" Monitor "Generic LCD Panel 1024x768" Subsection "Display" Depth 16 Modes "1024x768" ViewPort 0 0 EndSubsection EndSection # The 16-color VGA server Section "Screen" Driver "vga16" Device "Generic VGA" Monitor "Generic LCD Panel 1024x768" Subsection "Display" Modes "640x480" "800x600" ViewPort 0 0 EndSubsection EndSection # The Mono server Section "Screen" Driver "vga2" Device "Generic VGA" Monitor "Generic LCD Panel 1024x768" Subsection "Display" Modes "640x480" "800x600" ViewPort 0 0 EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64 # I128, and S3V) Section "Screen" Driver "accel" Device "My Video Card" Monitor "Generic LCD Panel 1024x768" Subsection "Display" Depth 16 Modes "1024x768" ViewPort 0 0 EndSubsection EndSection